PEQ Import doesnt recognize channels

Support
1

Issue description:

I have a peq file with filters for all, left, right channels separated:
Channel: L
Preamp: -1.9 dB
Filter 1: ON LSC Fc 57 Hz Gain 1.23 dB Q 0.606
Filter 2: ON HSC Fc 342 Hz Gain -0.13 dB Q 0.416
Filter 3: ON PK Fc 103 Hz Gain 1.19 dB Q 0.415
Filter 4: ON PK Fc 1251 Hz Gain -0.52 dB Q 0.694
Filter 5: ON PK Fc 6976 Hz Gain 1.07 dB Q 0.578
Filter 6: ON PK Fc 3385 Hz Gain 0.16 dB Q 4.000
Filter 7: ON PK Fc 2426 Hz Gain -0.39 dB Q 2.313
Filter 8: ON PK Fc 10210 Hz Gain -0.57 dB Q 2.507
Filter 9: ON PK Fc 237 Hz Gain 0.12 dB Q 4.000
Filter 10: ON PK Fc 5532 Hz Gain -0.79 dB Q 2.842
Channel: R
Preamp: -1.8 dB
Filter 1: ON LSC Fc 57 Hz Gain -1.23 dB Q 0.606
Filter 2: ON HSC Fc 342 Hz Gain 0.13 dB Q 0.416
Filter 3: ON PK Fc 103 Hz Gain -1.19 dB Q 0.415
Filter 4: ON PK Fc 1251 Hz Gain 0.52 dB Q 0.694
Filter 5: ON PK Fc 6976 Hz Gain -1.07 dB Q 0.578
Filter 6: ON PK Fc 3385 Hz Gain -0.16 dB Q 4.000
Filter 7: ON PK Fc 2426 Hz Gain 0.39 dB Q 2.313
Filter 8: ON PK Fc 10210 Hz Gain 0.57 dB Q 2.507
Filter 9: ON PK Fc 237 Hz Gain -0.12 dB Q 4.000
Filter 10: ON PK Fc 5532 Hz Gain 0.79 dB Q 2.842
Preamp: -10.6 dB
Filter: ON LSC Fc 21 Hz Gain -3.18 dB Q 0.707
Filter 2: ON PK Fc 222 Hz Gain -9.58 dB Q 0.400
Filter 3: ON PK Fc 1538 Hz Gain -1.68 dB Q 1.174
Filter 4: ON PK Fc 3467 Hz Gain -6.73 dB Q 0.640
Filter 5: ON PK Fc 4961 Hz Gain 3.42 dB Q 3.146
Filter 7: ON PK Fc 10173 Hz Gain -7.61 dB Q 3.999
Filter: ON HSC Fc 11384 Hz Gain 3.87 dB Q 0.707
Filter 9: ON PK Fc 12988 Hz Gain -9.47 dB Q 2.826
Filter 10: ON PK Fc 15859 Hz Gain -8.63 dB Q 4.000

But when importing it only recognizes filters for the all channel, not left or right, is there something wrong with my formating or is this function not implemented?

Logs:

Upload description: tratin

Additional information:

Reproduction steps:

Media provider:

Any provider

Screenshots:

2

This is not supported, is this an official format ? (You are also missing some index near the end).

And in all cases Symfonium does not have a preamp per channel.

Why would you need both L/R and all at the same time ? Looks like some kind of actual EQ + faking spacialisation.

3

Idk if it’s correct but eq apo reads it correctly on windows. I use it like this to have my channel imbalance correction(L/R) separated from the target eq (All). Also for convenience it would be better to have pages for channels instead of a button on the filter itself

4

Ok will support proper ones (with proper index and the proper Channel: ALL missing.